This campaign is closed

Animatronic Entertainment Macaw

Meet the robot macaw. A walking, talking, mechanical, macaw to invite and entertain your guests.

Closed
Closed
Closed
Closed
Closed

Animatronic Entertainment Macaw

Animatronic Entertainment Macaw

Animatronic Entertainment Macaw

Animatronic Entertainment Macaw

Animatronic Entertainment Macaw

Meet the robot macaw. A walking, talking, mechanical, macaw to invite and entertain your guests.

Meet the robot macaw. A walking, talking, mechanical, macaw to invite and entertain your guests.

Meet the robot macaw. A walking, talking, mechanical, macaw to invite and entertain your guests.

Meet the robot macaw. A walking, talking, mechanical, macaw to invite and entertain your guests.

Jonny Poole
Jonny Poole
Jonny Poole
Jonny Poole
1 Campaign |
Cambridge, United Kingdom
$0 USD $0 USD 0 backers
0% of $5,145 Flexible Goal Flexible Goal
Overview
Imagine being greeted by a ROBOT macaw that WALKS along its perch as it chats to you.


The Project

The plan is to develop a fully articulated animatronic macaw to be used in a number of applications from avian research to a welcoming display in a restaurant or shopping center and also to be made available for anyone to buy.

The rig will include the following features:

-Full eyelid movements, using technology already proven in some of my other work.
-Beak control with 2 axis movements,
-Full head control with dynamic compliance features of the body movements
-Walk along its perch
-Talking with synchronized movements
-Realfeel fabrication to look like a real macaw




The Perks

With each selected perk we will give away selection of downloads of the original project files from the ground up.
 
 

Disclaimer
Many of the parts will require some level of skill and patience to assemble.
Supporting documents will be provided with each downloaded section to help aid assembly.
Please be aware that other components such as bearings, servos, etc will be required to complete the full kit and are not supplied in the pledges unless specified.
A full list of the components used will be published with each download.


The FUND.
£280 - Sculpting, Moulding   
£1,200 - Fabrication                     
£1,300 - Manufacturing             
£250 - R&D                                  
£480 - Electronics                  
£650 - CAD Design                  

 


Work has already started on the Prototype


Initial linkage concept generation 

Initial concept design for walking rig



Prototype walking rig.

 







Please find more of my successful works on my site at 

www.innerbreed.co.uk 

Previous project: Animatronic Owl for research into raptors 

 



 

MEET YOUR INDUSTRY PARTNER..

As a mechanical engineer i design mechanisms and structures for high-end animatronics. With a strong background in 3D Art and 3D Modelling, as well as Physical Modelling, Mechanical design, and illustration. 

I am also responsible for all rough conceptual designs, creative problem solving, 2D and 3D mechanical design, designing mechanical animations within organic envelopes, reverse engineering using 2D artwork and 3D character models, multiple iteration prototyping and component assembly.

 - Jonny Poole


E x c l u s i v e  P a r t s  s u p p l i e r:
.co.uk


E  N  D  O  R  S  E  D    B  Y:

 


Risks and challenges

I would like to remain completely transparent about what I envision for this project and so im making sure I cover every aspect of what could go wrong early on or near completion. 
I have been working with 3D printing for a number of years and even more years in animatronics. I have had all sorts of things go wrong on and off set and so being prepared is something I am very used to.

Regarding the techniques and technology used throughout this project (all of which has been self taught but with excellent support from industry expert who also share the same passion for what we do) I have total confidence in the processes and procedures I need to undergo in order to achieve my goal.

Being involved in Animatronics has taught me a lot. Not only does it involve mechanical designing, electrical engineering, silicone and resin moulding and casting (if required), CAD, Mockup testing and fabrication, painting, hair punching, masking, cleanup, and more importantly health and safety, but also researching nature and learning how it all works is something i find very fascinating.

 

Other Ways You Can Help

Some people just can't contribute, but that doesn't matter. You can still be apart of this by sharing the project.
One day you may walk into a themed restaurant or shopping centre and see the macaw and you'll be able to say, i helped bring this thing to life!  

 

 

License agreement (electronic downloads)

Creative Commons Attribution-NonCommercial-ShareAlike (CC-BY-NC-SA)
This license lets others remix, tweak, and build upon these 3d models non-commercially, as long as you credit the designer and license your new creations under the identical terms.
If you use a CC-BY-SA licensed model, you MUST credit the original designer of the model and your derivative work MUST be released under the same CC-BY-SA license to the rest of the world. Additionally, you MUST NOT use the work for commercial purposes unless you get express consent from the original designer.

Copyright

Content belong to the designer, none of these rights are assigned or transferred to the end-user. The original manufactured products under a brand name and its design are the property of their respective owners. The designer does not own or license any other-party intellectual property. You are solely responsible for determining the need for and, if appropriate, obtaining any needed other-party clearance, consent, or release to use any other-party intellectual property in your projects.

Conditions of use

Any downloads are the property of the designer and can be used in your private or non-commercial projects as you need. The usage limitations are the following:

- Content can not be distributed, sold, assigned, transferred or otherwise redistributed in our original format or in any other format from which any original product, or any part of it can be separately exported.

- Content can be modified in any way in order to conform to your needs, however any such modifications are still derivatives of the original and can not be sold or distributed as your own.

- Content can be used only if one of the following applicable: it was bought by you via the designer or partner website; it is free and was downloaded from the designer or partner website; it was granted to you by the designer for promotional or other purposes.

Delivery Policy

All products are delivered via electronic downloads. As soon as order is approved you will be directed to a page with the download link. The link is available for 72 hours. Should this time pass and you didn’t manage to download in time we will issue you with a new link pending proof of original transaction.

Refund policy

Since the designer is offering non-tangible, irrevocable goods we do not issue refunds once the order is accomplished and the product is sent. As a customer you are responsible for understanding this upon purchasing any item. We only make exceptions with this rule on the following reasons:

- Double purchase: if you purchased some product twice due to unknown issue of the payment system or by any other reason;

- Download issues: it may happen so that you have troubles with downloading of the product. Before applying for refund in this case, please contact us so we may investigate the problem or upload purchased files to an alternative server;

- Irreparable defects, missing files, etc.: although all the products are thoroughly tested before release, unexpected errors may occur. In this case we may send you a download link with the missing or fixed files or make a refund;

- Product not-as-described: a request based on this reason is satisfied on a case by case basis in agreement of both parties concerned.

For more info on the process please follow this link:
Refunds: Can I get my money back?

Product Replication

We have made every effort to model the products as accurately as possible. However, different 3d printer settings may greatly affect the models. The designer cannot be held responsible for any settings you use and cannot guarantee that your 3d prints of any product meet the correct standards to achieve the best use of the product.

Print settings used by the designer for the prototype:
Machine: Cel Robox
Material: ABS
Bed Temp: 110ºc
Nozzle Temp: 230ºc
Nozzle: 0.3mm
InFill: 30%
Res:  0.1 mm, = 100 micron (µm)
Speed: 1.0
Total build time (depending on platform size and space taken up) = +-50 hours

Looking for more information? Check the project FAQ
Need more information
Let us know if you think this campaign contains prohibited content.

Choose your Perk

Just want to help the project

Currency Conversion $1 USD
£1 GBP
"I really like this project and i just wanted to help" Thank you for your contribution to the project. It will not go unnoticed.
Included Items
  • Thank you
0 claimed
NAME THE MACAW

NAME THE MACAW

Currency Conversion $2 USD $62 USD (96% off)
£2 GBP
You get to name the macaw (something sensible) ie not "Beaky McBeakface" On the campaign page, click 'Ask a question'. Type the NAME that you would like to call the MACAW and Send Message. I will add it to the random generator and post a video of the results showing the winning name. Winner will get a Macaw leg band worth £50 - 96%off
Included Items
  • Thank you
  • Competition entry
Estimated Shipping
April 2018
0 claimed
Access Lvl 1 .STL files

Access Lvl 1 .STL files

Currency Conversion $6 USD
£5 GBP
Access the Google Drive Storage and grab yourself the V-Slot End Caps .STL files. Inc, Servo End Plate Slave End Plate and both G2T timing hubs and Gear (C-Beam and OpenBuilds Gantry plate not included)
Included Items
  • V-Slot End Caps .STL files
Estimated Shipping
April 2018
0 claimed
Access Lvl 2 .STL files

Access Lvl 2 .STL files

Currency Conversion $10 USD
£8 GBP
Access the Google Drive Storage and grab yourself the Gantry Plate.STL files. Inc, Belt Plate add on with servo mount, cable guide and electronics holder (Servo, Belt, C-Beam and OpenBuilds Gantry plate not included)
Included Items
  • V-Slot End Caps .STL files
  • Belt Plate.STL files
  • V-Slot Electronics Housing
  • V-Slot Cable guide
Estimated Shipping
April 2018
0 claimed
Access Lvl 3 .STL files

Access Lvl 3 .STL files

Currency Conversion $12 USD
£10 GBP
Access the Google Drive Storage and grab yourself the Walking Rig.STL files.
Included Items
  • Belt Plate.STL files
  • Walking Rig.STL files
Estimated Shipping
April 2018
0 claimed
Access Lvl 4 .STL files

Access Lvl 4 .STL files

Currency Conversion $35 USD
£28 GBP
Complete lower rig files. (C-Beam and OpenBuilds Gantry plate not included) .
Included Items
  • V-Slot End Caps .STL files
  • Belt Plate.STL files
  • Walking Rig.STL files
  • V-Slot Electronics Housing
  • V-Slot Cable guide
Estimated Shipping
April 2018
0 claimed
Earn a Macaw leg band

Earn a Macaw leg band

Currency Conversion $43 USD $62 USD (30% off)
£35 GBP
Receive an exact replica production leg band for the macaw with its name and all as a momento to helping lift this project off the ground. A robust metal with a rough, pitted surface. Steel is available in a variety of polished and matte finishes Stainess Steel Matte Gold Steel Polished Gold Steel
Included Items
  • +EVERYTHING IN LOWER PERKS
  • Macaw leg band
Estimated Shipping
April 2018
0 out of 20 of claimed
Ships worldwide.
Access Lvl 6 .STL files

Access Lvl 6 .STL files

Currency Conversion $93 USD
£75 GBP
Access the Google Drive Storage and grab yourself the Complete Rig files INCLUDES ALL THE FILES TO PRINT YOUR OWN Walking Rig +C-BEAM LINEAR RAIL - 250MM +C-BEAM GANTRY PLATE KIT with Xtreme Mini V Wheel Kit (Does not include the Electronic components)
Included Items
  • V-Slot End Caps .STL files
  • Belt Plate.STL files
  • Walking Rig.STL files
  • V-Slot Electronics Housing
  • V-Slot Cable guide
  • C-BEAM LINEAR RAIL - 250MM
  • C-BEAM Plate -Xtreme Wheel Kit
  • All the required hardware
Estimated Shipping
April 2018
0 out of 15 of claimed
Ships worldwide.
Early Bird Sponsorship

Early Bird Sponsorship

Currency Conversion $4,762 USD $11,131 USD (57% off)
£3,850 GBP
You will also be the first person to receive a working final product to own. This price drops with each perk donation.
Included Items
  • TAKE OWNERSHIP OF THE MACAW
Estimated Shipping
September 2018
0 out of 1 of claimed
Ships to United Kingdom
Tags for this project
Up Caret