Since launching CodeRover SUMO and OFF-ROAD in 2022, we've poured our heart and soul into perfecting the CodeRover series, hoping to create an unmatched experience for all of our supporters. 

Introducing CodeRover ATV & Snowcat

CodeRover is more than coding, it's about bringing to life a robot that's uniquely yours, through a process that's as rewarding as it is educational. And this year, we're super excited to welcome two new buddies to the CodeRover family --- the CodeRover ATV & Snowcat.

Similar to their predecessors, CodeRover ATV & Snowcat are crafted entirely from exquisite laser-cut puzzle pieces. Immerse yourself in the joy of building your own robots and discover endless possibilities in robotics and programming!

Programming Compatibility 

CodeRover ATV & Snowcat works with CodeRover's existing add-ons and modules, and for Arduino UNO and Raspberry Pi, we have made a brand-new shield and HAT. Allowing Arduino and Raspberry Pi more complete control of CodeRover. 

This clip demonstrates a simple Arduino program that helps CodeRover Snowcat to automatically turn and face forward, utilizing CodeRover's onboard gyroscope & CodeRover Arduino UNO Shield. 

This clip demonstrates how CodeRover Controller and CodeRover ATV communicate using two Micro:Bits. the Micro:Bit on the CodeRover ATV then controls the CodeArm on the Utility Trailer to pick up a spare tire. 

Key Features and Enhancements 

The CodeRover ATV & Snowcat rolls out with more powerful batteries, an onboard gyroscope sensor for precision movement, and stronger motors for an extra boost. It seamlessly integrates with your favorite CodeRover add-ons and accessories enhancing both the fun and the learning in your robotics journey. 

CodeRover Core Plus Specs

CodeRover Core Plus is BIGGER, FASTER & SMARTER. We have listened to our backers and supporters' feedback and popular upgrade requests, focusing on improving compatible motors, onboard sensors, connector varieties, and power systems. 

CodeRover Rewards

CodeRover Add-Ons

The following rewards are add-ons for CodeRover ATV & Snowcat.

Utility Trailer:  Featuring a servo-controlled platform, it integrates with CodeArm, CodeArm Max, BB Gun, and Rubber Band Launcher, allowing your add-ons to rotate 360 degrees. 

Controller: If you are planning to use two Micro:Bits in pairs to control CodeRover, remember to add Controller to your pledge. 

ESP:Bit, Shield+, and HAT+: Interface your ESP32-CAM, Arduino Uno, or Raspberry Pi 3/4 with CodeRover Core Plus.

Roll-Cage: Upgrade the appearance of your ATV & Snowcat with our sleek black resin SLA printed Roll-Cage! While it enhances aesthetics, please note it may break upon hard impact.

Sensor Bundle: This sensor pack has 23 sensors and modules you need to prototype almost anything you want with CodeRover. 

School Pack

For schools and STEM educators, we have prepared two school packs at an additional discount. If you need more than 8, please find additional CodeRover ATV and CodeRover Snowcat in the add-on section. 

Shipping

Since different backers' rewards can weigh significantly differently, we will collect the shipping fee based on the actual weight of your package, right before we are ready to ship your rewards. Here is the estimate of the shipping cost based on the reward that consists of a CodeRover ATV or a CodeRover Snowcat, plus a Utility Trailer. (Actual shipping cost may vary for countries in EU and ASIA) 

You can adjust and change your shipping address anytime. When we send out shipping invoice emails, Your shipping address will be included in the email. Please double-check the address and if the shipping address is incorrect in the invoice email. please do not pay for the invoice and contact us to update your address. Once your address is updated, your shipping fee may become higher or lower. 

Timeline

How to Pledge

Stretch Goals

Meet the Team 

We are EdifyRobotics, a team of engineers, programmers, and makers, aiming to make STEAM and Robotics fun and accessible for everyone around the world.

Meet the brains behind CodeRover ATV & Snowcat, Vina and Anna, who have invested their expertise and passion into elevating CodeRover robotic platforms to new heights. Thanks to Tony and Allen who laid the foundation for the CodeRover series, we can expand and improve based on their creative work. Tony and Allen are supervising the new CodeRover ATV & Snowcat project while working hard on their latest adventure, Pixly.

Vina Chen is an experienced maker and robotics enthusiast. She spearheaded the design and construction of the first working prototype of CodeRover ATV.

Anna is an expert in industrial and toy design; she leads the team in integrating aesthetics with functionality.

Guaranteed Fulfillment

With the CodeRover ATV & Snowcat's launch, we're onto our 3rd crowdfunding campaign! We take fulfillment seriously and we're all about making sure you get what you pledged. 

Since the first project, we have been continuously making upgrades to our supply chain, handpicking more reliable suppliers and partners, improving PCB test and production methods, and adjusting mechanical design techniques.

Join us in this exciting new chapter and be part of our ever-growing family of enthusiasts and learners who've already experienced the joy of bringing their CodeRovers to life!