NINTENDO SWITCH is an awesome gaming console, we love it! It provides different gaming modes to fulfill players’ needs, allowing us to enjoy the games anytime and anywhere..

The handheld mode is always our favorite, but we found because of its size and flat back, it is difficult to hold the console and play the games for a long period of time making our hands too tied from holding the SWITCH. Which got us thinking, why not make a case, not only to protect the SWITCH but also providing two comfortable grips on the SWITCH, just like the PS4 and XB1 joy-cons.

So the GripCase was born to let game players to have the ability to play the games for hours without the feeling of fatigue.

• Reviews from Filip on YouTube. CLICK HERE to check out.

        https://youtu.be/-_AU-esY3h0

The SnapGrip is a basic set for the most players and games. And the TriggerGrip provides stronger grip force, it is designed for players with bigger hands and play hardcore games very often.

Both grip sets are made of hard PC (polycarbonate) with texture on the surface, which gives players a similar feeling of holding a XB1 or PS4 joy-con.

The GripCase is made of soft TPU (Thermoplastic polyurethanes) material, which is similar to the silicone, an environmental friendly material has been wildly used to make cell phone protective cases. It will not scratch your SWITCH like the hard plastic does. Most important, our GripCase is easy to put on and remove, convenient for gamers to take the case off when they intend to switch between different gaming modes.

The GripCase has a 0.7mm thin back, not only designed for heat sinking but also dock charging. There is no need to remove the case to get your SWITCH recharged in the dock.

The soft TPU material makes the GripCase so unique and it gives us so much more spaces to design this case in the way have never done before. Finally we achieved our goal, which the shoulder buttons were covered by the GripCase meanwhile remain the original keystroke sense.

We also designed a Carry Case to store the SWITCH with GripCase on. This Carry Case can swallow almost everything you can imagine, such as power bank, adaptor, USB cable, headset, game cards, joy-con grips and etc. The GripCase and the Carry Case can be the ultimate solution for your NINTENDO SWITCH.

• Huge Storage Space

• In-Case Charging

(Note:  The L shaped (angled) USB-C cable is not included in the pledge rewards.)

With our carrying case, charging your SWITCH while you traveling could never be so easy. There is no worry about bending the USB port. We give our carrying case a large storage space (6.1" (L) * 4.7" (W) * 1.3" (H) / 155mm (L) * 120mm (W) * 34mm (H)). So there is plenty room for your power bank and cables. By using the L shaped (angled) USB-C cable , your SWITCH is able to get juice from the power bank when both of them stay in the carrying case, as the picture showed above.

Of course, the power bank will generate extra heat when charging the SWITCH in the carrying case. Please see the temperature testing results for your reference.

We found that most of the heat came from the power bank. According to our tests, the power bank generated extra 44.6℉(7℃) after 1 hour charging and 53.6℉(12℃) after 2 hours. The temperature of SWITCH only increased by 41℉(5℃) and 50℉(10℃) correspondingly. We think the heat is still in a tolerable range. But we suggest the gamers who do care about the extra heat, could always take the power bank outside the carrying case when charging the Switch (as the following picture showed).

• Mesh Pocket Upgrade

Our team upgraded the mesh pocket by giving a top flap on the original mesh pocket. Now you are able to put small stuff in the mesh pocket without falling. We also upgraded its material, using the 3-layer sandwich mesh instead of the 1 layer mesh. The sandwich mesh is 1mm thick, has 2 mesh layers with a sponge layer in the middle, which provides great protection to your console.

Only US$5.00 per set, including 1 pair of SnapGrip and 1 pair of TriggerGrip. You will get to select your color options via a survey sent out.

Skull & Co. is established by a group of young people who love video games, we are designers, engineers, sourcing managers and etc. but we have one thing in common, games! From the beginning, we discovered that it was near impossible to find a well-designed third party gaming accessory in the market. They were made from a view of engineers not gamers. So we decided to make our own products from the point of view of a gamer. Our team became more and more experienced while creating our products.

This project is much bigger than any of our previous projects; also this is something we feel most passionately about. We need funds to invest on the tooling and people to follow and support this project. Our prototype has indicated to us that this is a great design and it can be mass produced smoothly. Our manufacture partner is ready to go. With support from Indiegogo, we can speed up this project and make this GripCase reality.

We have made a wide range of products in the past, while our team became bigger and more experienced. We have made few prototypes to polish this product and each prototype have made our goal of mass production more feasible. Our manufacture partner and us have solved every problem we have anticipated in facing in the process of bring this product to the market. We are mostly focused in the tooling in creating this product, any mistake or change can lead to delay in shipping of the products.

Based on our past experience, we anticipate being able to fulfill orders within 6-8 weeks, but we should note that forecasting demand is an inexact science. If order volumes exceed our expectations, it might take slightly longer to fulfill orders.