Check out the latest review of the LithiumCard PRO by AppleTechSpot
LITHIUMCARD PRO IN THE PRESS:
![]()
![]()
Over 500 contributors in 3 days!
Thank You for your continued support.
---
![]()
![]()
1-2-3 CHALLENGE.
LinearFlux's product philosophy is that form follows function. But most importantly, we place a high emphasis on the SPEED of charge. Our Engineers were faced with a design principle that was coined the 1-2-3 challenge. At the time it seemed impossible. After countless hours of intensive development we succeeded.
Our Unparalleled R&D Efforts Resulted In:
1 Full charge on an iPhone 6
2 Times the thickness of the original LithiumCard but 3 times the capacity
3 Amps of class-leading power. It's equivalent to the combined speed of 3 Apple iPhone wall chargers. It means less time waiting, up to a third of the wait for a full charge!
———
![]()
EVOLUTION.
Presenting the evolution of the HyperCharger. The LithiumCard Pro. It still has all the cables you need, but now with 3 Amps of Power. 3000mAh of capacity. Plus sharing and sync capabilities.
See how it works below:
———
![]()
TURNED UP TO "11".
Our latest HyperFET Gen2 technology has pushed the envelope of what's possible today. Nothing in its class, or size, can deliver up to 3 Amps of power. The PRO has been future proofed to meet the ever increasing power demand of smartphones today and tomorrow.
For example, the Apple iPhone 6 PLUS can actually demand over double the power (2 Amps) than the 1 Amp charger it comes with. The LithiumCard PRO can deliver up to 3 Amps of total power. As future generations of smartphones require more power, the PRO is more than ready to handle higher power demands with ease.
See how the PRO outperforms below:
———
![]()
HYPERPORT.
Specifically developed to be compatible with the new Apple Watch!
The PRO's exclusive HyperPort feature enables you to charge another USB equipped device. Just plug your own USB charging cable (not included) into the PRO's additional USB port to share HyperCharging with your friends.
———
![]()
CHARGE AHEAD.
HyperFET Gen2 circuitry is capable of charging your smartphone over 1% per minute compared to the original LithiumCard. For example, if the LithiumCard PRO is left to charge your smartphone for 15 minutes, expect up to 15% of more in additional battery capacity.
Advanced HyperCharging battery management algorithm extends the battery capacity beyond its 3000mAh rating. Meaning, you get more capacity than typical 3000mAh battery chargers.
———
![]()
BUILT IN.
The LithiumCard PRO has all the cables you'll ever need. Use the full size USB to charge the internal battery. Pull-out the microUSB, or Apple Lightning (sold separately), to charge your Apple iOS, or Android devices. As with the original LithiumCard, the cables for the PRO can be hidden away when not in use.
———
![]()
STAY CONNECTED.
LithiumCard PRO is available in either Apple Lightning, or microUSB, connectors. The microUSB connector works with many Android smartphones available today. The Apple Lightning connector works with all Apple iOS devices requiring a Lightning connector to charge.
*Apple Lightning and microUSB versions are sold separately
———
![]()
Backing up your smartphone's data to your computer has never been easier. There's no need to carry another separate cable for syncing data to your computer ever again. The PRO does it all.
———
![]()
SIMULTANEOUS CHARGING.
If both your phone and the LithiumCard are out of charge, we have a unique bypass charging system, which allows you to simultaneously charge a smartphone and the LithiumCard's internal battery.
———
![]()
CHARGE EVERYTHING.
LithiumCard charges most popular smartphones and electronic devices available today, such as Beats Wireless headphones or Jawbone Jambox. It has an Apple Lightning connector for your iPhone 6 and iPhone 6 PLUS, or a microUSB connector, for your Android phone.
![]()
———
![]()
NANOSTIK.
Without using adhesives, NanoStik, utlizing nanosuction technology keeps the LithiumCard virtually stuck to your device. Over time, the NanoStik may get dirty, simply rinse with warm water to keep it at its maximum "stickyness".
———
![]()
POWER LEVEL.
Pressing the power button also indicates LithiumCard's power level. The precision nano-refractive lens display will say it all.
White: Over 90% charged
Blue: Over 10% charged
Red: Less than 10% charged.
———
BEST IN CLASS.
![]()
———
WE NEED YOUR SUPPORT
We are nearly complete with the development of the LithiumCard PRO. We are all very excited to be about 5 weeks away from going into full production. With your support we can make sure that production, compliance certifications, packaging schedules and production order quantities are all aligned. The LinearFlux team would like to thank all of our contributors and supporters for making the LithiumCard PRO happen. Be part of the Evolution of the HyperCharger today!
FAQ
What is the
extra charge for shipping?
We will be
using FedEX for order outside of the USA or Hong Kong and that costs money. For
this reason, we will need to charge a small additional shipping fee for
international orders.
Can the new
HyperPort charge the Apple Watch?
Yes, during our R&D stages, the LithiumCard PRO's (with the Apple Lightning connector), HyperPort was exclusively designed to HyperCharge the new Apple Watch. However, the HyperPort also has the HyperFET Gen 2 circuitry to HyperCharge virtually any mobile device in the market as well.
Can the LithiumCard
PRO charge my iPhone and other Apple iOS devices?
Yes, the
LithiumCard PRO with Lightning connector can charge iPhone 5, iPhone 5C, iPhone
5S, iPhone 6, and iPhone 6 PLUS. It can also charge iPod Touch 5th
Generation, iPad AIR, iPad AIR 2, iPad mini, iPad mini Retina
Can the
LithiumCard charge my Android phone?
Yes, the
LithiumCard PRO with microUSB connector can charge most Android phones
available today such as the Samsung Galaxy Series, Motorola Droid, etc
How much
extra capacity can I expect to achieve when using a fully charged LithiumCard
PRO to add to my mobile device?
Using the
simple formula below, you can approximate the amount of additional capacity to
the device you are charging. For example, using an iPhone 6 with its 1,810mAh
internal battery, the results will be:
Extra
capacity = [2310/(your device battery capacity)] x 100%
iPhone 6
extra capacity = [2310/1810] x 100 = 127% extra capacity
How
efficient is the LithiumCard PRO?
The
Engineers at LinearFlux have further advanced the efficiency technology.
Typical accepted industry efficiency for premium portable chargers is about
70%. However, with our latest Gen 2 HyperFET charging circuitry, we have pushed
the envelope to deliver up to 80-85% efficiency!
How long
does it take to recharge the LithiumCard PRO?
The
LithiumCard PRO will charge faster with stronger powered USB ports. For
example, the PRO using an Apple 1A (5W) charger will take about 3 hours to
charge. However, using an Apple 2.4A (12W) charger will take considerably less
than 90 minutes. For best charging results, charge the LithiumCard PRO with the
LinearFlux HyperCharging Hub for even faster charging times.
What is the
estimated delivery date?
Barring any
type of production issues. We expect the delivery of the LithiumCard PRO to
start late April through early May 2015.
Once I order
can I change the connector type or color of LithiumCard PRO?
Yes, you
will need to contact us directly at orders@linearflux.com However, please expect some delays as these will need to be changed
manually by our staff.
Why can't you offer both Lightning and microUSB option for the LithiumCard PRO?
Initially our R&D team we pursued this idea but with various charging profiles for Apple and Android we wanted to make certain that our HyperCharging Gen2 circuitry was tuned for each application. In addition, there's not one bit of extra real estate inside the PRO circuitry to allow for extra features. Every square inch has been maximized. For this reason, we created a HyperPort, just in case a user wanted to charge a device different from the native connector.
