Indiegogo is committed to accessibility. If you have difficulty using our site, please contact support@indiegogo.com for assistance or view our accessibility notice by clicking here
The base has the power connectors for the circuits modules, the spacers and the 3mm parker bolts.
Choose the needed power supply for your project from the modules alternative. (5V, 3,3V, etc) and plug into the base with four bolts
and keep plugging all the modules you need.....
On this picture we have a 40 pin Pic controller, Alpha Numeric Lcd, Basic Stamp, Power Supply, Analog Signal, Digital Outputs with led and TTL to RS-232 converter.
If you need more funtions or circuit to your projets, JUST GO 3D!
And place the modules on top!
Like xbee, wifi, relay boards, etc...
OR MAYBE YOU WANT ANOTHER LCD TOUCH SCREEN, LIKE THIS
The big board (11" x 13") has a lot more space for modules and a breadboard holder at the center.
And you can go 3D too...
This is a upper view of the modular boards
Here is some circuits modules of the board family
There are 3 modules sizes, 2"x 2", 2"x 3" and 3"x 4"
3"x 4" Family, ULCD-32PTU, Alpha Numeric LCD with Outputs Button
2"x 3" Family, 40 pin Pic board, Basic Stamp, Atmega, Inverter, Digital Inputs, 28 Pic board, 18 pin Pic board, Ethernet to RS-232 Converter, Custom board for your owns circuits and more.
2"x 2" Family, Dual Triac board, Dual Scr Board, Relays, Touch Screen Controller, RTC Real Time Clock, Xbee, Keyboard, Digital Potenciometer, Usb Plug, 3,3V Power Source, 5V Power Source, 5-6-9V Power Source, I2C Memory, Tone Decoder, BCD Digit Display, ULN2408, Zero Cross Detector, 18 Pin Pic Board, 8Pin Pic Board, Usb to Serial Converter, Analog Output, Wifi to Serial Converter, TTL to Serial Converter, LDR Sensor, Gas Sensor, Motion Sensor, PIR, Digital Output Display with Leds, GPS Module, Voltmeter, Anmeter, Custom Board for you own circuit and more!
Looking for more information?Check the project
FAQ
$1 to $89
Thank You very much for your support!
Your name is gonna be on our credits page!
0 claimed
7" x 9" Modular Board
$90 USD
Thank you very much for your support!!
You'll receive a 7" x 9" Modular Board with the basic modules!
0 out of 100 of claimed
11" x 13" Modular Board
$190 USD
Thank you very much for your support!!
You'll receive a 11" x 13" Modular Board with the basic modules!
0 out of 100 of claimed
Both trainer boards
$290 USD
Thank you very much for your support!!
You'll receive a 11" x 13" and a 7" x 9" Modular Board with the basic modules!
0 claimed
Full kit
$500 USD
$500 and more
Thank you very much for your support!!
You'll receive a 11" x 13" and a 7" x 9" Modular Board with the full modules!
And a custom laser grave board with your name on it.