This campaign is closed

Revolutionary super lightweight tripod

All in one super lightweight tripod for travellers/ DLSR/ smartphone/ GoPro, attach on any place!

You may also be interested in

Closed
Closed
Closed
Closed
Closed

Revolutionary super lightweight tripod

Revolutionary super lightweight tripod

Revolutionary super lightweight tripod

Revolutionary super lightweight tripod

Revolutionary super lightweight tripod

All in one super lightweight tripod for travellers/ DLSR/ smartphone/ GoPro, attach on any place!

All in one super lightweight tripod for travellers/ DLSR/ smartphone/ GoPro, attach on any place!

All in one super lightweight tripod for travellers/ DLSR/ smartphone/ GoPro, attach on any place!

All in one super lightweight tripod for travellers/ DLSR/ smartphone/ GoPro, attach on any place!

mini orenji
mini orenji
mini orenji
mini orenji
1 Campaign |
Hong Kong, Hong Kong
$41,360 USD by 843 backers
$35,352 USD by 720 backers on Jul 6, 2016
Shipping
The project team has begun shipping their products. The delivery may be affected by shipping challenges and delays.
Check Check Check Truck
Concept Prototype Production Shipping
Overview
miniPlasterHand is an innovative product designed for travellers and burden-free photographers. It could be used in any situation or even spots that tripods are forbidden. All you need to mount your compact, mirroless, DSLR cameras or even instant or rangefinder film cameras, or just your day-to-day gopro or smartphone (with an adapter), is just a rail or simply a flat surface. And you could enjoy a very stable and hassle-free setup for long exposure shots and time-lapse photos.

 

 

miniPlasterHand is an innovative product designed for travellers and burden-free photographers. It could be used in any situation or even spots that tripods are forbidden. All you need to mount your compact, mirroless, DSLR  cameras or even instant or rangefinder film cameras, or just your day-to-day gopro or smartphone (with an adapter), is just a rail or simply a flat surface. And you could enjoy a very stable and hassle-free setup for long exposure shots and time-lapse photos. The tiny unibody of MPH is made by elegant yet super lightweight magnesium alloy, which weight only 103g. Just carry around in your pocket to enjoy the beauty of the mini Plastic Hand!

Mission complete!


Thank you very much for the support to us! The production of mini Plaster Hands are all completed. Here are some pictures of the beautiful yet elegant mPH:

 

Thank you all media, editer & youtuber!


Reviews & Unboxing From Editer and MPH users

Video Review English: Totally Weird Name, Totally worthwhile Gadget “Mini Plaster Hand  by Nate "Blunty" Burr

Review English:  Stuff I bring when I travel by Marc Hastenteufel

Review Traditional Chines: http://photo.popart.hk/newweb/archives/58953 by Frankie

Unboxing Traditional Chinese: http://viewfinder.hk/?p=2690  by Alfred

Unboxing Traditional Chinese: http://frankster.digital/  by Hamster

Timelapse & Test Video

https://www.youtube.com/watch?v=JH60uSSGr4g

https://www.flickr.com/photos/oscaraymc/32106342036/in/pool-3100658@N23/

https://www.youtube.com/watch?v=MjGMasNz2OE&feature=youtu.be

https://www.youtube.com/watch?v=DtEJMxFXFmc

For more reviews and information, please go to "miniorenji MPH page"

 

 

Flickr Group Photos


Please enjoy some MPH user sample pics from our flickr group. You are also welcomed to submit your favourite pic by MPH.

Flickr group:  https://www.flickr.com/groups/3100658@N23/

For more testing shots, please visit: https://www.flickr.com/photos/134232230@N05/

 

Operating Principal


mini Plaster Hand use a special antiskid strap, by wrapping on any horizontal cylindrical surface, it will attach stably, or directly putting on any surface without using strap. There are 3 ways to use mini Plaster Hand, it was designed to be used at any environment anytime conveniently.

 

Mode Suitable place : Any flat surface

Just put it on a flat surface and done! This is the quickest way to use mini Plaster Hand! You even do not need to press the strap and let it flatten. Press the back of the plate lightly could enhance stability on rough surface, while you do not need to press if it is already in balance. You could also mount your long lens with a quick plate and a tripod head on it, with making adjustment accordingly.

 

Mode B Suitable place : Any horizontal cylinder (1-4 secounds)

Wrap the strap on curved rail and put it through from the front hole to the rear hole, and tighten it. Then place the middle part downward, and put it through the middle part. Lastly, wrap the rest of the strap to the rail and hold it by hand. Set the self-time on camera to 2 sec or more and done! It would be safer to slide the strap obliquely via the hinge, as it is a safety design to prevent any accidental fall of the camera.

 

Mode C Suitable place : Any horizontal cylinder (5-60 secounds)

Put it on a curved surface and pass the strap through the back. Pull it upward and hold downward to tighten the strap. Put the middle accessory to the bottom and counter weight by a bag or any heavy stuff, and it will be perfectly secured. You can set the exposure time even longer.

 

Steps for usage


Notice before usage

1. For brand new MPH, please remove all transparent protecting film carefully. 
2. For use with ease, always put the T buckle in the front position. (Please refer to Mode B/C instruction)
3. The strap could be wrapped around MPH and you probably don't need additional bag to retain it. Always put it in your bag and you could apply MPH at anytime and anywhere. Please refer to our official site for more information.
4. For update information, please go to: http://www.miniorenji.com/mini-plaster-hand

 

Mode A

1. Tighten knob on ballhead.
2. Put ballhead on MPH.
3. Install camera on ball head.
4. Set angle as indicated.
5. Set self-timer and press the shutter!
 
 
Mode B
1. Tighten the ballhead.
2. Put the ballhead on MPH.
3. Put the T-BUCKLE near the MPH BODY. (Important!)
4. Release ballhead and put on the camera.
5. Place the MPH and adjust the location.
6. Pass HOOK BUCKLE through MPH BODY, wrap around on rail and put back through T-BUCKLE.
7. Wrap the rest of the strap on cylinder and tighten it.
8. Hold the HOOK BACKLE on the rail with hand and you could take a few secounds exposure shot.
 
 
Mode C
1. Tighten the ballhead.
2. Put the ballhead on MPH.
3. Put the T-BUCKLE near the MPH BODY. (Important!)
4. Place the MPH on rail.
5. HOOK BUCKLE through the MPH BODY around the rail, then through the T-BUCKLE.
6. Put your bag or heavy objects on the HOOK BUCKLE.
7. Release ballhead and put on the camera.
8. Set the angle, set self timer to 2 secounds or more.
Tips: Mount mPH nearby a vertical rail enhance the stability.
 
 
Cylinder shape and material

Anti-slippery side of strapping in mini Plaster Hand is made by a very stable and specialised material. It could be used on many type of surfaces with anti-slippery function. It is also very durable and our test results are as following.

 
 
 
Hook Buckle & Protection

This is a simple but useful safety design. If you put it straight right through the hinge, you could not pull in or out of it, unless you put it through the hinge obliquely.

 
 
 

If you want to get more information of application and setup methods,

please go to Online Introduction & Instructions at:

https://www.miniorenji.com/mini-plaster-hand

We will also "post" updates here and you are welcomed to check it out! 

 

About MPH & miniorenji


For this product, we’ve created a brand“miniorenji”, we hope to publish our new products (if any) in future under this brand name. Why“orenji”? It means orange, small yet tasty and lovely, we want to have all our designed products just like the mini-orengi, tiny but useful. Also,“mPH”designer  named this product as“mini Plaster Hand”, because we always see there’s a saying on some photography forums, “You can’t shoot a good photo at night, unless you gear with a pair of plaster hands”.

From inspiration, design, sourcing components, producing prototype, to making agreement of small production amount with the manufacturer, it takes a lot of time and effort. Your funds will be used on purchasing high quality material, packing, manufacturing and transportation. With your support, not only the production will come true, more product that convenient everyone daily live could be produced. Thank you for reading this project, and thank you for your support. 
 
 
 
 
 

 

 

Looking for more information? Check the project FAQ
Need more information
Let us know if you think this campaign contains prohibited content.

You may also be interested in

Up Caret