Indiegogo is committed to accessibility. If you have difficulty using our site, please contact support@indiegogo.com for assistance or view our accessibility notice by clicking here

This campaign is closed

The mini-TS Open-Source Touch Synthesizer

A 2-Octave Touch Synthesizer Keyboard

You may also be interested in

Closed
Closed
Closed
Closed
Closed

The mini-TS Open-Source Touch Synthesizer

The mini-TS Open-Source Touch Synthesizer

The mini-TS Open-Source Touch Synthesizer

The mini-TS Open-Source Touch Synthesizer

The mini-TS Open-Source Touch Synthesizer

A 2-Octave Touch Synthesizer Keyboard

A 2-Octave Touch Synthesizer Keyboard

A 2-Octave Touch Synthesizer Keyboard

A 2-Octave Touch Synthesizer Keyboard

Jan Ostman
Jan Ostman
Jan Ostman
Jan Ostman
4 Campaigns |
Fagersta, Sweden
$523 USD by 7 backers
$523 USD by 7 backers on May 14, 2017
Concept
The project team has not yet produced a working demo for their concept. Their ability to successfully produce a prototype may be affected by product development or financial challenges.
Lightbulb Wrench Warehouse Truck
Concept Prototype Production Shipping
Highlights
Mountain Filled 4 Projects Mountain Filled 4 Projects
Overview
Do you like synthesizers? Do you like small? Do you like DIY and Open-Source? Then this is for you!

Short Summary

The mini-TS is a pocket sized (165x65mm) fully open-sourced synthesizer with a 2-Octave capacitive touch keyboard.

 

 

It uses a rotary encoder and a 128x32 graphic OLED for parameter editing.

Specifications
2 Phase Distortion DCO's with Detune
1 DCF Peak with ENV Modulation
1 DCA with AR-Envelope
CV/Gate 1volt/Octave output.
2 CV Inputs
1 Stereo Audio Output

The same PCB can be built in 3 configurations:

The CV keyboard config
The simplest config is for using it just as a CV/Gate keyboard for modular gear. This mode is selected by shorting Pin17 and Pin18 on the chip.

The WASP config
This config uses CV/Gate/MIDI-IO and 6 external potentiometers for a WASP style synthesizer. This mode is selected by shorting Pin18 and Pin19 on the chip. This is the same config the Tiny-TS uses.

The full config
This uses a rotary encoder and a 128×32 OLED for synth parameter entry. It also has 2 CV inputs on the TRS jack rings and MIDI-IO.

What We Need & What You Get

This is Open-Source and DIY and both circuit-diagram and code will be available to do your will.
But to build it a PCB is still needed so the funding will go to PCB manufacturing and part ordering for the kits.

 

Looking for more information? Check the project FAQ
Need more information
Let us know if you think this campaign contains prohibited content.

Choose your Perk

The PCB Perk

$29 USD
Get the PCB and join the DIY build community.
Included Items
  • The mini-TS PCB
Estimated Shipping
June 2017
1 claimed
Ships worldwide.

The PCB & Chip Perk

$59 USD
If you are unable to program a chip this perk gives you a PCB and a preprogrammed chip. Just start building.
Included Items
  • The PCB & Preprogrammed Chip
Estimated Shipping
June 2017
0 claimed
Ships worldwide.

The Kit Perk

$79 USD
Includes all the parts needed to build the mini-TS.
Included Items
  • The mini-TS Kit
Estimated Shipping
June 2017
5 claimed
Ships worldwide.

The Plug & Play Perk

$99 USD
I like it and just want to play it immediately. This is the mini-TS Prebuilt.
Included Items
  • The mini-TS Prebuilt
Estimated Shipping
June 2017
1 claimed
Ships worldwide.

You may also be interested in

Up Caret