Charge your devices in any setting with the HoverCharge 3-in-1 Fast Qi Wireless Charger. It uses an anti-gravity epoxy-based rubber mount that holds your phone with or without a case. No magnets or metal plates required, so it doesn't damage your phone or block NFC payments.
- 7.5 watts for iPhones.
- 10 watts for Android devices.
- Powered by USB-C.
- 4-separate mounts.
- Separate car & wall power adapters.
*On mobile, click “READ THE STORY”
HoverCharge is a Qi Wireless Charger
For your Car
Home
& Office.
No Magnets. No Metal Plates. No Nano-Suction Tape. No Problem.
Magnets mounts require metal plates on your phone, blocking NFC payments (Apple Pay, Google Pay, Samsung Pay), and damage your device if the metal plate is removed. Nano-Suction tape lose their grip after just a few uses. Our epoxy based mount grips to your phone like a magnet, without the magnet. No metal plates required, NFC payments not blocked. No residue left on your device.
HoverCharge continues to hold its strength again and again. We tested the same prototype for over a year and it holds any phone, no matter what size, bare skin or bulky cases, with the same strong grip.
HoverCharge can Handle any Road
or Driver.
Works with or without a Case.
Portrait or Landscape.
Supports 7.5W Qi Fast Wireless Charging for iPhones.
And 10W Qi Fast Wireless Charging for over a dozen Android Phones.
Each HoverCharge Kit Includes:
1 x HoverCharge
1 x Long-Arm Suction Mount
1 x Vent Mount
1 x 3M Mount
1 x Table-Top Mount
1 x Car Power Adapter w/ USB
1 x Wall Power Adapter
We worked on building a design that was minimal, iconic, but invisible when in use. Using the highest quality materials, we housed a Qi Standard wireless charger in a body that doesn't overheat, with fixed frequency so nothing interferes with your phones touchscreen, compass or Face ID, in one of the most compact form for a wireless charger. The HoverCharge can be tilted 360° with the four separate mounts provided, so you can use your charger practically anywhere!
Long-Arm Suction Mount
Vent Mount
3M Mount
Table-Top Mount
*Samsung S9 & S9+ also supported
Phone Case Demo
So far the HoverCharge has able to handle every case we have tested. If you have any case suggestions, please leave a comment or send us a message and we will test it out. Here are a few cases we have tested already:
Production
About Us
We at MATRYX focus on creating & designing new and innovative tech solutions. HoverCharge represents our love and passion for creating a consumer product that we hope will become a part of your everyday life.
Our goal was to create a minimal but iconic design. We focused on providing a consumer solution which doesn't exist in the market today. We stressed the fact that the best technology is one that feels invisible. Finding that every other in-car wireless charger on the market is either bulky or contains numerous shortcomings, HoverCharge's goal was to become the wireless charger that rules them all. Magnet-mounts with their metal plates hinder NFC payments & cause damage to the device, cradle based mounts require you to strap in your phone using both hands, gravity based mounts only work in portrait mode and nano-suction tape mounts last only a few uses before they stop holding your device.
Our epoxy based mount is unlike anything on the market. Not only does it work with or without a case, without metal plates, and without any cradles, but our mount holds your device stronger than a magnet, allows portrait or landscape mode, allows for NFC payments and unlike nano-suction tape, never loses its grip, strength or power. The same prototype from a year ago continues to hold even the heaviest and bulkiest cased phone in the roughest driving conditions till this day!
Putting that together with the most compact wireless charger together created the best wireless charging solution on the market, which isn't just perfect for your car, but also your home, office or practically anywhere with a power outlet!
HoverCharge is the only 3-IN-1 wireless charger which provides you the solutions for all your wireless charging needs!
We spent over a year in working out any hiccups or road bumps and only launched our Kickstarter when we became fully confident in our team to finally begin mass producing.
We have sufficient means to manufacture around 40,000 units in a month. Anything above that will take another week to a month depending on quantity. We are at the stage where everything is set-up for mass production but need your contribution to keep product costs to a minimum.
For your support we want to promise guaranteed shipping or your money back.
We will create an atmosphere of transparency throughout the process and will provide video updates on every step of the way. and for any requests, questions or comments can be reached directly at info@hover-charge.com.
Looking for more information?Check the project
FAQ