Please Note That

• For Indiegogo, we are only offering the charger in a special Indiegogo edition BLACK color (see photos under Rewards section below). White color chargers are for illustrative purposes and may be offered later at retail after fulfillment for Indiegogo is completed.
• We will only be shipping rewards to USA/Canada addresses for this project. We will not offer International (outside USA/Canada) shipping for this project due to unpredictable postal shipping times and costs as a result of COVID-19.
• We do not recommend using plug adapters for this charger as plug adapters are generally not rated for 1500W pass-through power and will not support the stacking ability of this charger. As such, we will also not be offering any plug adapters for this charger. This further reinforces our decision not to offer International shipping.
• We apologize for any inconvenience caused to our international backers. As an alternative solution, you can get our bestselling, most crowdfunded 100W GaN Charger with free International plug adapters for 30% off here (discount applied at checkout) which will more than enough pay for any courier express shipping that is less affected by COVID-19 restrictions. The promo expires on 12/31/2020.

++

9to5mac Hands-on HyperJuice Stackable GaN

The Verge: "More Impressive Than Its Last"

SlashGear: "The Holy Grail of Chargers"

++

From makers of the bestselling GaN Charger

In 2019, HYPER created the world's first and smallest 100W GaN charger which went on to raise over $3.3M between Kickstarter and Indiegogo, making it the world's most crowdfunded and bestselling GaN charger product. Now from Hyper...

Comes an even smaller & better GaN charger

Smaller than a tiny box of mints

HyperJuice 65W

HyperJuice 100W

More than 20% smaller than the previous model with more power, features & USB-C ports

Available in 2 sizes (65W and 100W)

• HyperJuice 65W with 3 charging ports (2 x USB-C and 1 x USB-A)
• HyperJuice 100W with 4 charging ports (3 x USB-C and 1 x USB-A)

65W charges 3 devices (2 x USB-C, 1 x USB-A)

Quick charge a laptop, tablet, and smartphone all at the same time.

100W charge 4 devices (3 x USB-C, 1 x USB-A)

Quick charge a laptop, tablet, smartphone, and USB device all at the same time. 

Bulky chargers can fall off the wall power outlet

HyperJuice stay close to the wall

So they will never fall off. 

With built-in outlet that supports up to 1500W

Rated at 1500W, it can power the most demanding electronics and appliances. HyperJuice uses a power outlet but also gives one back. Easily insert HyperJuice into any situation even when there are no available power outlets.

Fighting over a single power outlet?

Gone are the days of running out of available power outlets. HyperJuice does everything from a single outlet. 

HyperJuice stacks upon itself and let you power multiple laptops from a single power outlet

Power 4 laptops from a single power outlet and even more... 

Stack up to 16 chargers for 1600W of power

HyperJuice Stackable Chargers are rated to pass through 1500W of power so you can stack a total of 16 x 100W chargers to create a 1600W supercharger with 48 x USB-C and 16 x USB-A ports, all over a single power outlet. 

Smaller than every 100W charger out there

Smaller than Anker Atom PD 4 (100W), Apple 96W, Apple 61W & HyperJuice 100W 2C2A (2019)

Powered by the latest Gallium Nitride (Navitas GaNFast) Technology 

HyperJuice utilizes the industry-leading Navitas GaNFast NV6125/NV6127 Power IC to miniaturize components normally found in traditional chargers. The new Gallium Nitride semiconductor material allows for power devices that can operate at higher voltages and switching frequency which results in smaller and more efficient chargers.

See the following video to learn more about GaN:

Sophisticated Design (Worldwide Patented)

HYPER is the pioneer of delivering 100W of power in a GaN charger and we have been working for almost a year perfecting the circuit design and firmware to fully utilize the Navitas GaNFast NV6125/NV6127 Power IC to bring the HyperJuice charger to fruition.

We want to make the smallest 65W and 100W charger ever so the circuit board and components are laid out in the most compact and space-efficient manner. Only the industry's most efficient components that can deliver the best performance in the smallest of space are used. The dense circuit board is then surrounded by high-density thin heat sinks to aid in heat dissipation. The entire package is then wrapped in a minimalist fire-resistant polycarbonate enclosure to complete the efficient design.

HyperJuice 65W Exploded View

HyperJuice HyperJuice 65W Exploded View

HyperJuice HyperJuice 100W Exploded View

HyperJuice 100W Exploded View

Proof of Concept Video

The following single shot unedited video of working prototypes of the HyperJuice 65W and 100W Stackable GaN Chargers demonstrate that even after stacking 3 chargers over a single power outlet, it is able to pass through more than 1600W of power to power a water kettle and each HyperJuice 65W/100W charger is still able to provide the maximum power of 65W and 100W respectively.

Product Specifications

HyperJuice 65W and HyperJuice 100W

HyperJuice 65W

HyperJuice 65W smaller than a tiny box of mints

• Product Dimensions: 72 x 36 x 30.5mm / 2.83" x 1.42" x 1.2"
• Product Weight: 103.8g / 3.66oz / 0.23 lb
• Power Input: AC 100-240V 50/60Hz 2.4A
• Power Outlet Rating: 1500W
• Max USB Power Output: 65W
• Power Efficiency: 95%
• Ports: 2 x USB-C and 1 x USB-A
• USB-C1: 65W Power Delivery 3.0, PPS 3.3~21V3.23A, 5/9/12/15V3A, 20V3.25A
• USB-C2: 65W Power Delivery 3.0, PPS 3.3~21V3.23A, 5/9/12/15V3A, 20V3.25A
• USB-A1: SCP 3.4~5V, Quick Charge 3.0, 5V/3A, 9V/2A, 12V/1.5A
• Protocol: BC1.2, Apple 2.4A, AFC, FCP, SCP, QC2.0/3.0/4.0+, PD2.0/3.0, PPS
• PCBA Structure: HQR GaN
• GaN IC: Navitas 6125
• Protection: Over-current, Over-voltage, Over-temperature, Short-circuit Protection

HyperJuice 100W

HyperJuice 100W smaller than a box of mints

• Product Dimensions: 85.4 x 45 x 30.5mm / 3.36" x 1.77" x 1.2"
• Product Weight: 166.1g / 5.86oz / 0.37 lb
• Power Input: AC 100-240V 50/60Hz 2.4A
• Power Outlet Rating: 1500W
• Max USB Power Output: 100W
• Power Efficiency: 95%
• Ports: 3 x USB-C and 1 x USB-A
• USB-C1: 100W Power Delivery 3.0, PPS 3.3~21V3.23A, 5/9/12/15V3A, 20V5A
• USB-C2: 100W Power Delivery 3.0, PPS 3.3~21V3.23A, 5/9/12/15V3A, 20V5A
• USB-C3: 100W Power Delivery 3.0, PPS 3.3~21V3.23A, 5/9/12/15V3A, 20V5A
• USB-A1: SCP 3.4~5V, Quick Charge 3.0, 5V3A, 9V2A, 12V1.5A
• Protocol: BC1.2, Apple 2.4A, AFC, FCP, SCP, QC2.0/3.0/4.0+, PD2.0/3.0, PPS
• PCBA Structure: HQR GaN
• GaN IC: Navitas 6127
• Protection: Over-current, Over-voltage, Over-temperature, Short-circuit Protection

Rewards

In order to simplify Indiegogo reward fulfillment so that we can get all the chargers out to everyone as soon as possible, we are only offering the charger in a special Indiegogo edition BLACK color (see photos below). We love Black and many backers have asked for Black for our previous project because Black color is more stain-resistant in the long run. White color chargers are for illustrative purposes and may be offered later at retail after fulfillment for Indiegogo is completed. Please understand that having multiple color choices, especially for different chargers within the same reward will just complicate and delay the entire Indiegogo fulfillment process. For example, we won't be able to ask for your color choices until after the project ends via a survey which means we cannot accurately prepare the rewards beforehand.

Indiegogo Special (30% off)

• $56    -   1 x HyperJuice 65W
• $69    -   1 x HyperJuice 100W
• $126  -   1 x HyperJuice 65W + 1 x HyperJuice 100W

Expected Retail Price

• $79.99   -   1 x HyperJuice 65W
• $99.99   -   1 x HyperJuice 100W
• $179.98  -   1 x HyperJuice 65W + 1 x HyperJuice 100W

Reward Fulfilment

To ensure timely reward delivery, we will ship rewards via insured postal service from our fulfillment and distribution centers in:

• California USA - fulfilling rewards within the United States

Project Timeline

• September 28, 2020 - Kickstarter begins
• October 26, 2020 - Kickstarter ends
• November 2020 - Production begins
• December 2020 - Shipping of Early Bird rewards
• January 2021 - Shipping of Kickstarter rewards
• February 2021 - Shipping of Indiegogo rewards

From the team that brought you the World's First 100W USB-C battery pack and Kickstarter Most Funded power bank project

(as well as the world's 1st, smallest, and most crowdfunded 100W GaN charger)

About Us

HYPER by Sanho Corporation has been making award-winning USB-C products since 2015. We also have a long proven track record of delivering Kickstarter and Indiegogo projects. Our most successful Kickstarter and Indiegogo project, HyperDrive USB-C Hub for MacBook Pro, raised over $3.1 million and is currently the most crowdfunded MacBook and USB-C accessory. Our latest Kickstarter and Indiegogo, HyperJuice 100W GaN Charger, which raised over $3.3 million is the most crowdfunded USB-C charger. The HyperJuice 130W USB-C Battery Pack is the most crowdfunded power bank project on Kickstarter ($1.4M). Our HyperDrive USB-C Hub for iPad Pro is the most crowdfunded iPad accessory ($1.2M) and many more. So we do have a lot of experience with USB-C and Apple products. This is our 26th crowdfunding project. Our previous crowdfunding projects have altogether raised over $14 million and we have delivered to over 140,000 backers.