NanoSound is a Raspberry Pi audio add-on board for audiophiles. While it works out of the box running volumio & kodi, it is designed to be fully customizable and configurable by taking advantage of Raspberry Pi.  NanoSound have already been successfully funded, in production and sold in over 12 resellers.

It has received a 5-star full score from Pi Magazine!

\

 

 

 

Yes, it works out of the box with Volumio & Kodi.  A pre-configured Volumio & Kodi image will be available for download.  Just plug NanoSound onto the Raspberry Pi, assemble the included mounting screws, insert the SD card and it's done!

Side view showing mounting screws

NanoSound is an audio add-on board designed to plug on top of Raspberry Pi 2 / 3 (which has 40-pin GPIO connector). 

It combines: 

• Texas Instruments PCM5122 DAC (24bit Resolution & 384khz Sampling Rate)
• Power switch (using same design as our Pi Switch product)
• 6 GPIO buttons for Media Control
• Infrared receiver and remote control
• 1.3" OLED display with multi-language support

Multi-language Support

It provides an all-in-one solution for audiophonics who want an affordable and high quality DAC with many convenience features. 

Absolutely, NanoSound is fully customizable and programmable! we take full advantage of the Raspberry Pi’s open architecture.  

• The 6 buttons are simple GPIO buttons. Python source code will be provided to read button events.
• The IR receiver and control is LIRC compatible. Lircd.conf will be provided to read button input. 
• The 1.3" OLED display is using i2c. The python display driver code is open sourced. 
• The onboard on/off switch uses the same design and software as our first kickstarter project. It has an attiny85 onboard and is open sourced. 

Because NanoSound’s DAC uses the very common TI 5122 chip, it is compatible with many distributions (such as Openlibre, Raspbian) etc. Nanosound’s DAC uses the same driver as HifiBerry DAC+ . 

NanoSound uses a high quality Texas Instruments PCM5122 DAC (Burr Brown 112/106-dB Audio Stereo DAC With 32-bit, 384-kHz). It is also accompanied by Hifi grade capacitors from EVOX RIFA, WIMA and ELNA.  

We have tested NanoSound with many hi-end hifi systems and headphone. The quality is really good and on par with audio player which cost a few hundred USD more.  

We have done blind listening comparison with other DACs using same chipset. As far as we are hear, they all sound equally good!

Yes,  3D printed is available for purchase and download

Rewards & Models:

 Installation