![]()
Looks like a wall plate
Designed to blend easily into any home, the finished installation is a very clean appearance.
Super Thin!
The S-Mount is easily installed on any surface, allowing control where you want. At only 1/4” thick, the tablet looks like is floating just slightly off the wall, for a very clean appearance.
![]()
Tablet can go in any direction
The high power magnets, combined with the custom rubber face, allows the panel to be placed at any angle and then easily rotated.
![]()
Super Safe, your tablet will NOT fall off!
A custom rubber face protects your device from slipping and keeps it in place, plus it's easy to clean.
![]()
Mount Anywhere, even on a mirror!
The options for attaching your tablet are endless.
Fits ANY tablet or smart phone!
![]()
Continue to use your favorite case!
![]()
![]()
"Testing showed the tablets were secure and that it was almost impossible to pull a tablet off the S-Mount when exerting downward or shear force. However, when the tablet was removed using a pealing motion it came off the mount quite easily."
Doug Olenick - Forbes Magazine
"Overall, the S-Mount is quite effective with its assigned task and if a tablet owner is looking for a simple way to secure a tablet to a wall this could be a good option."
Doug Olenick - Forbes Magazine
![]()
Dimensions: 2.75”(70mm) wide x 4.55” (115.5mm) Tall x
0.25” (6.35mm) Deep
Construction
Material:
Main
Body – PVC Plastic
Face
– Custom Rubber
Other
- parts made of steel zinc or powdercoated
Magnets:
Neodymium rare earth
Adhesive:
3M
![]()
Although
there are always risks in any project, this is a very solid item. All of the development is 100% complete,
vendors are sourced, and prototypes of the various parts are tested and
approved. At this point we need to start
tooling for the metal and plastic parts, from there it's an easy process to final production.
We have a history of designing,
developing, and bringing products to market, so your investment is solid.
![]()
May 2011: Idea formulated
March 2012: Drawings started
February 2013: First prototype developed
March 2013 to October 2014: Prototypes developed and tested, field samples tested, 45 different revisions!
October 2014 to January 2015: Vendors chosen and pre-production samples received
February 2015: Photography, videos and artwork
April 2015: Indiegogo Launch
May 2015: Tooling begins. Parts acquisition non-tooled parts
June 2015: First off-tool samples
August 2015: Production Begins
August 2015: First shipments made
![]()
Where
is this made?
The units are designed and assembled in the
USA. The parts are sourced from the USA
and other countries.
How can I ask a question?
We would be happy to help, just send us a note!
How
can I buy multiple units?
Simply multiply the number of units that you
want by the cost. We do have discounts for 3 and 10 packs.
What
is the S-Mount mount in the videos?
These are hand made prototypes of the final design. The
production versions will look even better as they will be created with
professional tooling.
How
long did you spend developing the S-Mount mount?
I started with the idea four years ago. Over 45 different prototype variations, and
hundreds of designs were completed to get to this final product.
Will
the magnets hurt my tablet?
No, the magnets will not interfere with any part
of your tablet or phone and will not erase the memory.
How
much weight will this design hold?
We do not have an exact weight specification,
although we have tested the design with large 12.2” tablets and they held VERY firm. The tablet is EXTREMELY hard to slide do to our proprietary rubber surface, yet can be removed by simply pulling outward.
Can
the tablet fall off the mount?
Anything
is possible with enough force. We have
used this design with large 12.2” tablets, and were very aggressive in trying to
get them to “pop-off” with HARD button pressing, they stayed put with no
issues.
What
if I have more than 1 tablet and want to use the mount for both of them?
We sell extra metallic adapter pads for only $4 each on
Indiegogo, this will allow you to add a tablet.
Is
the metallic adapter pad that goes on the rear of the tablet reusable?
No. It
uses a strong adhesive that will not hurt the tablet, but the metallic pad will bend upon removal. We sell extra
replacement metallic adapter pads for only $4 each on Indiegogo.
What
if I move and want to remove the S-Mount?
If using the 3M double stick tape, simply use a putty knife to slowly pry it from the surface. If you screwed it to the surface, peel back the rubber and unscrew the
mount. A small amount of patch/paint to
cover the holes and you are good to go.
Will
it work if I mount it at an angle?
Yes it will work on any surface at
any angle.
Can
I pick up the S-Mount mount locally?
No, at this time we do not offer local pick-up
How
much is shipping? (We are looking into reducing the cost, any excess will be refunded to you at time of shipment)
NO INTERNATIONAL SHIPPING AT THIS TIME, SORRY!
United States:
1 Units = $3
3 packs = $8
10 packs = $12
Canada:
1 Units = $15
3 packs = $30
10 packs = $42
Sorry, No International at this time
When
will it ship?
We are expecting the first orders to ship August 2015
Can
I get a refund?
Yes. We understand that things come up in life
and decisions change. After the campaign ends simply contact us and we will
issue the refund.
What
if I don’t like it?
No problem…although we are sure you will be very
satisfied. Within 30 days of receiving the S-Mount, contact us and we will issue the refund.
Is it patented?
Yes, several US and International patents are filed.